Filter By:
Stems

$42.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

$99.99
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware.
- The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar
- Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars
- Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness

$42.00
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress.
- Material: Carbon monocoque with forged alloy steerer clamp
- Stem Angle: 84 -degree
- Drop/Reach: 126/75mm(Measured center-to-center where the levers mount)
- Sweep/Flare: 4.7/1-degree
- Features mounting holes for computer/accessory mount
- Matte UD carbon finish
- Weight: 350g (42cm x 100mm)

$99.99
RaceFace designed their Atlas 35 stem to reduce overall system weight while retaining the proven stiffness and performance the Atlas line is known for. The stem itself is measurably stiffer than the 31.8mm offering and, although the system is a seemingly burlier build, the weight savings gained by the reduction in bar material actually makes the 35 system lighter overall. An impressively light, strong addition to your aggressive trail or DH/FR build.
- Four-bolt bar clamp holds bar securely in position
- Interlocking U-Shaped Handlebar Clamp Geometry
- Faceplate eliminates stress risers which cause your bar to bend or break
- Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube
- Stack Height: 40mm

$64.99
The Chester 35 Direct Mount stem is a practical 2-piece design with big bold graphics and that legendary bomb-proof Race Face toughness baked right in.
- The Chester 35 direct mount stem is an all new 2 piece direct mount design
- Forged and machined from 6061 aluminum
- Weight saving single bolt faceplate
- Four bolt bar clamp holds bar securely in position.
- Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts
- Faceplate eliminates 'stress risers' which can cause your bar to bend or break

$99.99 - $109.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength.
- CNC Aluminum
- 0-degree rise for perfect fit on aggressive bike frames
- Extensive CNC machining for weight reduction without impacting strength
- TopLock faceplate design for easy and secure installation

$69.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.

$300.00
An aerodynamically honed stem with adjustable length and angle to optimize your position. The rider makes up 80-90% of total aero drag, so refining your position can produce some of the biggest gains of all. Further, the shape of the stem, plus the ability to eliminate headset spacers, allows for cleaner airflow at the front of the bike, producing valuable drag reduction. Created in conjunction with Team Dimension Data, the stem delivers the confident and responsive ride feel demanded by the best riders in the world.
This stem is intended for negative drop only and cannot be flipped or reversed in a positive rise.
- Material: Carbon
- Faceplate Material: Aluminum
- Hardware Material: Titanium
- Stack Height: 42.5mm with length shim / 45.5mm with angle shim
- Torque Spec, Face Plate Upper Bolt: 10Nm, Lower Bolt: 6Nm
- Torque Spec, Steer Tube: 5.5Nm

$125.00 - $140.00
A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications.
- Blind bolt holes and shaping
- Cold-forged and precision-machined
- No-gap face plate and clamp area
- Stainless hardware

$300.00
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping.
- Material: Carbon Fiber
- Faceplate Material: Aluminum
- Hardware Material: Titanium
- Stack Height: 41mm
- Torque Spec, Face Plate: 5.5Nm
- Torque Spec, Steer Tube: 5.5Nm
- Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)

$125.00 - $300.00
A 35mm clamp diameter, gravity-rated, carbon-bodied mountain stem built for aggressive riding and the muscular look of today’s carbon Enduro and All-Mountain bikes. The M7 stem is designed to complement the look and ride feel of ENVE M7 handlebars.
- Material: Carbon
- Faceplate material: Aluminum
- Hardware material: Titanium
- Clamp Diameter: 35mm
- Steerer Clamp Diameter: 1-1/8-inch
- Torque Spec: 5.5Nm
- Weight: 85g (35mm), 92g (50mm), 99g (65mm)

$300.00
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff
- Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue
- Titanium hardware and lightweight aluminum faceplate
- 107g

$300.00
- 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff
- Over rough roads the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue
- Titanium hardware and lightweight aluminum faceplate
- 107g
Page 1 of 1