Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
The Salsa Guide Seatpost is designed to blend into the background; just like a good seatpost should. Strong, reliable, and always just where you left it. - 6061 Aluminum shaft - Two-bolt head
The new Reverb AXS XPLR dropper post delivers more control, confidence, and fun on gravel roads everywhere. Getting the saddle out of the way means more room to move, saving you from awkward maneuvering and sketchy descents. We created an all-new design complete with lightweight air-only internals featuring built-in compliance we call ActiveRide. It's like travel for your saddle. Enabled by SRAM AXS technology, Reverb AXS XPLR is part of the ultimate personalized cockpit. - New 27.2mm Reverb AXS XPLR delivers more control, confidence, and fun for gravel - ActiveRide—Air only internals provide a fully rigid top-out position. With the touch of your AXS controller, you've got built-in compliance to ensure comfort and control over the roughest sections of gravel - Two travel options to choose—50mm or 75mm - Saddle clamp options compatible with 7x10 oval carbon rails. - Seat post length includes 400mm and 350mm (50mm drop only) - AXS Technology allows rider customization via the AXS Mobile App - AXS handlebar controls (drop or flat bar) - Shared battery with all other SRAM AXS enabled components - System is completely waterproof and dustproof to IP69K—take it anywhere - SRAM AXS battery and charger included SPECIFICATIONS: - TRAVEL: 50mm, 75mm - POST DIAMETER: 27.2mm - POST LENGTH: 350mm, 400mm - REMOTE: AXS Controller Sold Separately - SADDLE RAIL COMPATIBILITY: Round/Oval (7x9 & 7x10), Round/Oval (7x9) - WEIGHT (G): 562 - WEIGHT BASED ON: 75mm Travel 400mm Length W/O battery - Battery 25g
The Cascade dropper post pays homage to the Cascade mountain range, home to some of the best riding in the PNW. This post is a workhorse: it’s super reliable, loved by our customers, and now features multiple travel options. The Cascade provides dependable up and down service for the miles to come, and maintenance on the Cascade is easy (like all our droppers). Plus, external routing at the mid-cap ensures your cables are kept nice and tidy during up and down actuation. You can find sweet upgrades to the Cascade’s OG dropper design on the posts featuring 150/170mm of travel. These models have larger diameter stanchions, making them stiffer and lighter… which is sweet because who wants a bike part that’s heavy and too compliant? These longer travel models also come with an added DU bushing to combat seat wobble, because let's face it… the only thing that should be wobbly on your bike are your legs after a long ride. Levers: - Choose from our Loam Lever, Puget 1x or 2x drivetrain compatible levers, or Roadie/Drop Bar Lever Kit for road bars - 1x Lever - Designed to be used with bikes using a single front chainring, this is a "shifter style" lever - 2x lever - Designed to play nice with front shifters, this is a "vertical" lever that accommodates for the shifter on the left side of your handlebar Product Specs: - Choose any lever kit - 30.9 & 31.6mm Diameters - Weights: 125mm - 608g, 150mm - 613g, 170mm - 674g - 2-bolt Micro Adjust Head - Fixed External Routing at the Mid Cap for clean cable routing - 3-year warranty!
$199.50 - $267.50
The OneUp Dropper post is available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm. We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower. Starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length. The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp. FEATURES - Travel adjust shims allow you to custom tune your post to dial in your perfect length. - Cable actuated for easy installation and a simple no bleed remote - Ergonomic remote paddle position - Reliable sealed cartridge internals - User replaceable cartridge only $60 USD - Easy to service at home - 2 year warranty UPDATES - Shortest total length of any dropper - Shortest stack height of any dropper - New upper DU Bushing in the upper collar - Increased bushing overlap and durability - 100-210mm post lengths in 10mm increments. - 20g lighter SPECS - Drop 120mm, 150mm, 180mm, 210mm adjustable*. - Diameter 30.9, 31.6, 34.9 - Routing Internal only Remote Compatibility: - SRAM Matchmaker X - SRAM MMX clamps - Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 - Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only - 22.2mm Bar Clamp - All other groups 10 speed SHIMANO - Cable clamping remote only (post requires cable stop to be assembled at base of post) - Travel Reducing Shim Reduces travel by up to 20mm. Weight Post Only - (30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g - (31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g - (34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g Remote Only - Remote with 22.2mm Bar Clamp - 46g - Remote with SRAM Matchmaker X / I-spec-EV - 43g - Remote with Shimano I-spec-EV - 43g - Remote with Shimano I-spec II - 41g - Housing and Cable (1300mm installed length) - 50g
$18.99 - $19.99
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.
$349.99 - $359.99
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Factory Series models feature Genuine Kashima Coat - Remote lever sold separately
$39.99 - $40.00
Easton's EA50 Seatpost is rugged, reliable and perfect for all your cycling adventures. It's made from 2014-aluminum with Easton's TaperWall technology that controls the post's internal thickness, adding material where you need it and none where you don't. It provides excellent strength and durability while keeping the weight low. Plus, the EA50 boasts an easy-to-use 2-bolt clamp for secure seat adjustments.
Our new EA90 seatpost applies our patent pending ISA saddle adjustment allowing for independent seat angle and fore-aft movement, helping you refine your positioning without needing to undo your rail clamps for each minute tweak. Saddle angle is then locked in place so you have the confidence your saddle will stay put after you find your fit. - Finish: Black anodized - Weight: Zero, 295g; Setback, 268g - Head offset: 0mm, 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Material: EA90 alloy
The newly redesigned EC70 Seatpost takes our superlight unidirectional carbon and applies our patent pending ISA technology - Independent Saddle Adjustment - which allows for completely independent fore-aft adjustment and saddle adjustment. With the 2 pitch adjustment bolts, the saddle angle gets locked into place as if you were adjusting limit screws, and unlike single bolt designs, you get adjustability and security. Available in 20mm Setback and Zero configurations. - Finish: Matte Black UD Carbon/Matte Black Head - Weight: Zero offset, 210g; Setback offset, 223g - Head offset: 0mm; 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Rail clamps: 7mm round; 7mm x 9mm oval (both included) - Material: EC70 carbon
$275.00 - $300.00
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacture/Seatpost Collar - Weight: 178g (25.4mm, 25mm offset), 168g (27.2mm, 0mm offset), 178g (27.2mm, 25mm offset)
ENVE has found that a dropper seatpost can enhance the gravel experience and that 40mm of drop is just the right amount for most gravel riding and racing. A dropper post allows the rider to lower their center of gravity on descents which can result in greater control and therefore confidence. While designed primarily for gravel riders, the G Series Dropper allows XC riders and racers a lightweight dropper with just the right amount of drop. - 395 grams (can be trimmed for an additional 40 grams in weight savings) - Mechanical actuation - Internal Routing Only - 40mm of drop/travel - 350mm length (Min Post Height: 140mm seat post clamps saddle rail - 27.2mm diameter post (Includes shims for 30.9mm and 31.6mm posts) - Fully serviceable, no special tools required - Compatible with all cable actuated remote levers
$24.99 - $28.00
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset
$320.00 - $410.00
3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family. Noteworthy updates of the REVIVE 2.0 include: - One piece 3D-forged upper tube unit for improved stiffness and strength - Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance - CNC-finished actuation lever for even smoother engagement - New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)
Page 1 of 1