Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

$24.99
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.
$17.00
Say goodbye to flying mud! The SPEEDROCKER Extension clip-on mudguard extension mainly protects riders behind you from dirt and wet conditions. The extension—made of black, impact-resistant plastic—can be easily clipped onto the tried and tested SPEEDROCKER rear mudguard, thus extending it by 170mm. It can be mounted and removed without any tools in just a few seconds. The splashing between the tire and mudguard at the lower end also allows it to better deflect any spraying water and mud. This not only protects the rider's back, but also their cycling companion from any flying dirt. - Weight: 36g - Length rear fender: 170mm
$85.99
The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers. - Rear fender expands for custom fit - Rubber fasteners mount to a variety of frame styles
$79.99
Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system The ASR or ESC safety system ensures that the struts are decoupled if branches get between the spokes so that the wheel does not lock. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ESC safety system - Bottom bracket cutouts - Made in Germany - Tire width in inches: 2.1"-2.4" - Tire width in mm: 54-61mm - Front mudguard length: 680mm - Rear mudguard length: 1185mm
$68.99
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber - Weight: 580g - Max. outer diameter: 35mm - Wheel size: 27.5" (650B), 28" - Tire width: 52mm - Length, front fender: 680mm - Length, rear fender: 870mm
$10.00 - $18.00 $11.00 - $18.00 Up to 9% Off
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
$46.00
- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings
$72.00
- Used to install fork dust seals
$18.00 - $82.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$49.99
- RockShox, 11.4118.038.000, Service kit, Monarch B1RL C1 R, RT, RT32014+
$51.00
RockShox, 11.4118.038.001, Service kit, Monarch XX B1 2014+
$34.00
Rear Shock Service Kit Full- Monarch With Autosag Specialized B1
$6.00
RockShox, 00.6815.066.020, Reverb post bleed tool
$45.00
50 Hour Service Kit (Includes Air Can Seals, Piston Seal, Glide Rings) - Sidluxe A1 (2020)
$6.00 - $38.00
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
$11.00
Works with the following forks: - Pike - Lyrik - SID - Revelation - Reba - Paragon This tool can also be used to remove and install SRAM/Shimano cassettes.
$22.99
The smartest, most convenient torque key now comes with enough bits to suit every need. Make sure those stem bolts are tight enough, and double check the torque on the seatpost bolt while you're at it. The Ritchey Bicycle Torque Key is an essential tool for those important bolts. Available with 4 or 5Nm options, this 6-bit set includes just about every bit you'll need for your bike, and a convenient holder to keep it all organized. - Hex 3/4/5mm - Torx T-20/25 - Phillips #1 - 4 or 5Nm max torque - Bit holder included
$59.00
The Mag-Tank takes a new twist on top tube bags. Instead of a zippered opening, access to the bag is by a smartly contoured top flap held in place by a magnetic buckle with mechanical engagement (read - the magnet aids in closure, while load is placed on a connection). It will not unintentionally open and spill your gummy bears when you end up in the trees with your bike upside down like a conventional magnetic closure would. You can easily open the bag one handed by pulling outward on the cord loop and you have access to the whole top of the bag. To close, just flick the flap down and the buckle self-engages! The Mag-Tank is just a hair smaller than Revelate's Gas Tank to prevent leg movement from hitting the edge of the flap opening. Please note - while the cover to this bag is designed to shed rain and spray, due to the large panel opening it is not a sealed bag or waterproof bag. Features: - One-handed access while riding - Side panels stiffened with HDPE plastic sheets - Wrap around panel is padded with closed-cell foam - Interior lined with yellow fabric for greater visibility - Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts - Beefy top tube strap has gripper material with double back wrap for bomber stability - Made in the USA with domestic and imported materials. Sizing: - Length: 8.5" - Max height: 5" - Width at stem: 2.5" - Tapers down to 2.5" tall and 1.5" wide along the top tube Specifications: - Weight: 4.5 oz. - Volume: Approximately 65 cubic inches - Materials: VX21 & 42 XPac, 420-denier yellow and red lining, closed-cell foam-padded tube sections, HDPE sheets
$6.99
- 8mm to 16mm hex wrench adapter for removal of spindle from Cinch non-drive crank arm
$10.00
Shield Your Bike The 529 Shield's unique ID makes it easy to contact you if your bike is recovered. Register. Report. Recover! Keep your bikes safe in the 529 Garage the largest community-powered bike recovery service.
$61.00
This rear-mounted hydration system holds two bottles and attaches directly in front of seatpost for easy hydration on the go. - Full angular adjustment allows bottles to be rotated - 6061-T6 aluminum construction - Brackets included to mount two Co2 cartridges - Fits 31.6mm to 27.2mm seatpost with shims (included) - Includes two cages and 6061-T6 Aluminum clamp and extension
$13.00
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
$39.99 - $42.00
- The perfect meal replacement option for days on-the-go, or activities when you just can't (or don't want to) stop, this portable food is the perfect solution - Nutrient-dense calories that deliver lasting energy - Blended, not baked, with chunks of real fruits, nuts and seeds - for fantastic taste and texture - Responsibly sourced - 12 servings - USDA-certified organic - Gluten-Free - Kosher - Non-GMO - Vegan
$39.99
If your bike has a hollow bottom bracket, the Pro Bottom Bracket stand makes it easy and convenient to do maintenance work. This stands folds up for easy storage when not in use. - Compatible with Hollowtech 2 bottom brackets - Coated alloy - Anti-slip base
$37.99
This complete set has everything needed to remove cassettes from the hub. Its dual compound handle offers extra grip and comfort. - Integral safety pin on cassette remover - Designed for Shimano cassettes
$18.99
- 15mm wrench for installation and removal of pedals with wrench flats on axle - Dual compound handle for extra grip and comfort - Angled for safe and easy use
$124.99
• High quality precision tool; A must for the serious dealer / cyclist! • Adjustability from 3 to 15 Nm; for all stems / handlebars / seatposts etc • Incl. M3, M4, M5, M6, T25 & T30 Chrome Vanadium sockets and extension • Small and easy to use incl. storage-box
$15.99
Planet Bike's Stainless Cage is light and strong to hold your bottle securely. Constructed from tubular stainless steel, this rustproof cage weighs only 44 grams, and it won't scuff or scratch your bottle, either.
$5.00
- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars